Would a sealed box be good for a 1000 watt amp ? - online mount n blade
I bought a Kenwood Electronix Frontlines combo sound that comes with 2 subs and an amp .. I bought a locked box was informed yesterday that if you have a locked box, which have more power than a cover .. . Should I return the box and try to replace it with an extent?
PS just listen to Rap and R & B
Subs
# 12 "4-ohm subwoofer
# Single Voice Coil 4 Ohm
# Polypropylene cone with the texture of the urethane foam surround
# Power range: 50-400 watts RMS
# Peak Power Handling: 1200 Watts
# Frequency response: 39-300 Hz
# Sensitivity: 86 dB
# Top-mounting depth: 6-7/8 "
# Sealed box volume: 0.75-1.75 cubic feet
Volume # Blocks worn: 1.0-2.0 cubic feet
.
Amp
* Class-D Mono PFlower amplifier
* Output
300 watts RMS x 1 @ 4 Ohms
500 watts RMS x 1 @ 2-Ohms
MAX 1000 watts x 1 channel
* CEA-2006 Compliant
* 2 ohm load
* Gold Plated Power & Speaker Terminals
* Output Terminals Line Extension
* Cast aluminum Heat Sink
* A one-sided burden of terminals for the installation of multi --
* Power MOSFET Switching Power Supply
* High input
* Turn-on signal detection
* Blue Illumination
# SPECIFICATIONS
* Amplifier Class: Class D
* Number of Channels: 1 channel
* Maximum power: 1000 watts
* Output power RMS @ 4 ohms: 300 watts x 1 channel
* Output power RMS at 2 ohms: 500 watts x 1 channel
* Bridge Power: N / A
* THD: 1%
* Signal to Noise Ratio (dB): 83dB
Frequency (Hz): 20Hz ~ 200Hz
* Integrated Crossover: Yes
* High-Pass Crossover Frequency: N / A
* Low Pass Filter Frequency: 50Hz ~ 200Hz
* Bass Boost: 0dB ~ 18dB
* Fuse: 40A x 1
* Dimension (WxHxD) inches: 11 "x 2-5/16" x 9-3/8 "
Monday, February 15, 2010
Online Mount N Blade Would A Sealed Box Be Good For A 1000 Watt Amp ?
Subscribe to:
Post Comments (Atom)
2 comments:
Since there are two "simple" voice coil subs to a 2-ohm load wire is then only 500W x1 is not enough, the follow-potental Push completed. You need an amplifier, 800W RMS x1 @ 2 ohms, and power then the connection to subs in parallel.
As for the locked box is better and more certain about the sound quality. Subs in a sealed box can be a little more powerful than a table of blankets.
Sonic Electronix offers one years of the parties to this possibility. Now, with the force that pushes the company will take years.
Do not 1000 watts. They have a 500 watt book. each get 250-watt amplifier. Amplifiers In 1000, then for one, makes 1000 watts RMS.
Next sealed boxes require no power to subwoofer boxes are taken and executed.
Woofer, but can handle in a closed box are more power than the woofer in an area.
thats because the air in a closed box woofer support as a buffer is available. sharp picture for some of these properties, but not with the port tuning frequency.
Please be a Box is a locked box in the tuning frequency, even if they feed more power woofer in a sealed box. Implementation boxes can add greater efficiency and 3.9 dB noise. to define orPerspective, it would double the amount of energy to an increase of 3 dB to obtain.
so in theory, will be charged in sealed subwoofer box even with 1000 watts be as strong as in the case with only 500 watts. In real life, there are several other factors to determine the intensity, but I shall give you some basic things.
I prefer to listen to speakers cut deeper on bass. But there is nothing wrong with sealing the road. Use and see what you want
Post a Comment